MC OldMan by Michał Cacko
Oscillator 1 timbre
Both sawtooth and square oscillators are enabled.
Pulse width of square oscillator is manually set to 50% (50% is perfectly square, 100% is very short pulsewave).
Oscillator 2 timbre
Volume level for oscillator 2 is manually set to 224.
Tone for oscillator 2 is manually set to 57.
Volume (VCA) volume
Amplification level is set to 6dB (255) and is modulated by VCA Env.
VCA Env direct modulation amount for amplification level is 255.
Pan spread is off.
Noise timbre
Noise level is manually set to 91.
OSC 1→2 sync timbre
to be completed
Oscillator 2 is syncronized to oscillator 1. This generates rich harmonic content when changing oscillator's relative piches.
Low-pass filter (VCF) timbre
Low-pass filter cut-off frequency is set to 1405.92Hz (142) and is modulated by Note Vel, VCF Env.
VCF Env direct modulation amount for low-pass filter cut-off frequency is 90.
Low-pass filter envelope amount is modulated by Note Vel.
Note Vel direct modulation amount for low-pass filter envelope amount is 128.
Filter resonance is statically set to 30% (77).
Oscillator drift & unison detuning timbre
Unison detune level is off.
Oscillators drift level is manually set to 83. Drift rate is 74
Oscillator 2 pitch pitch
Oscillator 2 pitch is set to -12 semitones and is modulated by LFO 1.
LFO 1 direct modulation amount for oscillator 2 pitch is 255.
FX routing & levels fx
FX mode is set to Insert, and routing is
Effect 1 level is manually set to 0. Effect 2 level is manually set to 100. Effect 3 level is manually set to 100. Effect 4 level is manually set to 150.
Phase fx
not yet complete
Multi-Band Distortion fx
not yet complete
Noise Gate fx
not yet complete
Delay fx
not yet complete
Note Vel modulator
Controls VCF Cut-off Frequency, VCF Envelope Velocity Sensitivity.
| function | type | destination | amount |
|---|---|---|---|
| timbre | fader-indirect | VCF Cut-off Frequency | 90 |
| menu | VCF Envelope Velocity Sensitivity | 128 |
LFO 1 modulator
Controls OSC 2 Pitch.
| function | type | destination | amount |
|---|---|---|---|
| pitch | fader | OSC 2 Pitch | 255 |
| name | value |
|---|---|
| LFO 1 Rate | 0.04Hz (0) |
| LFO 1 Delay / Fade | 0s (0) |
| LFO 1 Shape | Triangle |
| LFO 1 Key Sync | off |
| LFO 1 Arp Sync | off |
| LFO 1 Mono Mode | 0 |
| LFO 1 Slew Rate | 0 |
LFO 2 modulator
Controls Noise Gate Param 1.
| function | type | destination | amount |
|---|---|---|---|
| fx | matrix | Noise Gate Param 1 | 56 |
| name | value |
|---|---|
| LFO 2 Rate | 0.12Hz (36) |
| LFO 2 Delay / Fade | 0s (0) |
| LFO 2 Shape | Sine |
| LFO 2 Key Sync | off |
| LFO 2 Arp Sync | off |
| LFO 2 Mono Mode | 1 |
| LFO 2 Slew Rate | 175 |
VCA Env modulator
Controls VCA Gain for All Voices.
| function | type | destination | amount |
|---|---|---|---|
| volume | menu | VCA Gain for All Voices | 255 |
| name | value |
|---|---|
| VCA Envelope Attack Time | 0.41s (69) |
| VCA Envelope Decay Time | 0.46s (79) |
| VCA Envelope Sustain Level | 4% (11) |
| VCA Envelope Release Time | 0.6s (92) |
| VCA Envelope Trigger Mode | Key (0) |
| VCA Envelope Attack Curve | 128 |
| VCA Envelope Decay Curve | 0 |
| VCA Envelope Sustain Curve | 128 |
| VCA Envelope Attack Curve | 0 |
VCF Env modulator
Controls VCF Cut-off Frequency.
| function | type | destination | amount |
|---|---|---|---|
| timbre | fader | VCF Cut-off Frequency | 90 |
| name | value |
|---|---|
| VCF Envelope Attack Time | 0.39s (67) |
| VCF Envelope Decay Time | 0s (0) |
| VCF Envelope Sustain Level | 50% (128) |
| VCF Envelope Release Time | 0s (0) |
| VCF Envelope Trigger Mode | Key (0) |
| VCF Envelope Attack Curve | 128 |
| VCF Envelope Decay Curve | 0 |
| VCF Envelope Sustain Curve | 128 |
| VCF Envelope Attack Curve | 0 |